CM-011-WDM15 fiber converter series

Technische specificaties

Standards
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX/100BASE-FX
IEEE802.3x Flow Control and Back Pressure

Connector
Fiber: Duplex ST/SC/MT-RJ/VF-45, Simplex SC(WDM single mode)
RJ-45 Socket: CAT-3/5 (10/100Mbps) Twisted Pair cable Auto MDI/MDI-X and Auto-Negotiation Function Support
[Multi-Mode] power budget: Min: 9dB, MAX: 19dB.
[Single-Mode] power budget: Min: 19dB, MAX: 26dB.

Switch architecture
Store and Forward

Fiber parameters
Fiber Core: Multi-Mode (62.5/125um, 50/125um), Single-Mode (8/125um, 10/125um)
Wavelength: 1310nm(Multi-mode), 1310nm(Single-mode), 1550nm(WDM, TX), 1310nm(WDM, RX)
Fiber Dis.: Multi-Mode Fiber 2KM, Single-Mode Fiber (30 KM), WDM (Single-Mode)20KM

Link Loss Forward
TX=>Fiber: If TX port link down, then converter will forced fiber to link down.
Fiber =>TX: If Fiber port link down, the media converter will forced TX port to link down.

Transparent packet
64 to 1600 Bytes

Power
Chassis Cabinet: AC 100~240 V, 50/60 HZ, 90w*2
Stand-alone (external adapter): DC9V / 0.7A

Environment
Operation Temp.: 0°C to 45°C (32°F to 113°F)
Operation Humidity: 10% to 90% (Non-condensing)

LED
Module: Power, TX (100Mbps, LK/Act, FDX/COL), Fiber(LK/Act, FDX/COL)
Chassis: Power Good (A,B), Fail (A,B)

DIP Switch
DIP Switch 1: UTP Auto-Nego / 100Mbps Full Duplex mode
DIP Switch 2: Fiber Full/Half Duplex
DIP Switch 3: LLF (Link Loss Forwarding) Disable/Enable
DIP Switch 4: Switch Converter / Pure converter mode

Dimension
Module: 119mm x 85mm x 26mm
Multi-Converter Chassis - 440mm x 266mm x 133 mm (3U, 19")

Storage Temp.
-40°C to 70°C

EMI & Safety
FCC Class A, CE & UL,cUL

Warranty
2 years