Productbeschrijving
Technische Beschrijving
Standards
IEEE Standards
IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3z for 1000Base-X
IEEE 802.3ab for 1000Base-T
IEEE 802.3ad for LACP (Link Aggregation Control)
IEEE 802.3x for Flow control
IEEE 802.1D for STP (Spanning Tree)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree)
IEEE 802.1s for MSTP (Multiple Spanning Tree)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery)
Switch Architecture
Back-plane (Switching Fabric): 1.6Gbps
Transfer Rate
14,880pps for Ethernet port
148,800pps for Fast Ethernet port
Packet Buffer
1Mbits
Mac Address
8K MAC address table
Flash ROM
4Mbytes
DRAM
32Mbytes
Connectors
10/100TX: 6 x RJ-45 with auto MDI/MDI-X function
100M fiber: 2 x SC/WDM type connector for single-mode or multi-mode type fiber cable
RS-232 connector: RJ-45 type
Network Cable
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5/ 5E cable
EIA/TIA-568 100-ohm (100m)
Optical Cable
Multi-mode: 50/125um~62.5/125um
Single mode: 9/125um
Available distance: 2km (Multi-mode)/30km (Single-mode)
Wavelength: 1310nm (Multi-mode/Single-mode)
Protocol
CSMA/CD
LED
Per unit: Power (Green), Power 1 (Green), Power 2 (Green), Fault (Red), Master (Green)
6 10/100: Link/Activity (Green), Full duplex/Collision (Yellow)
Fiber: Link/Activity (Green)
Power Supply
24 VDC (9~56VDC), 12~36VAC, Redundant power with polarity reverse protect function and removable terminal block.
Power Consumption
9 Watts
Operating Humidity
5% to 95% (Non-condensing)
Operating Temperature
-20°C~60°C / -4°F~140°F (Standard model)
Storage Temperature
-40°C~85°C / -40°F~185°F
Case Dimension
IP-30, 52mm (W) x 106mm (D) x 144mm (H)
Weight
735 g
Fan Number
0
Installation
DIN rail and wall mount ear.
MTBF
232,194 hrs
EMI &EMS
FCC Class A, CE EN61000-4-2 (ESD), CE EN61000-4-3 (RS), CE EN-61000-4-4 (EFT),
CE EN61000-4-5 (Surge), CE EN61000-4-6 (CS), CE EN61000-4-8, CE EN61000-4-11,
Safety
CE/EN60950-1
Stability Testing
IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration)
Warranty
5 years
Extra informatie
The Lantech IES-2206F-II is a 6-Port 10/100TX + 2-Port 100FX Industrial Switch with advanced SNMP functionality. The SNMP features are including MSTP, QinQ, QoS for 4 queues, 801.q VLAN, IGMP snooping and query mode as well as SNTP and SMTP. Simulated PTP (Precision Time Protocol) client** is a software feature for time clocking matching with IEEE1588 ground master for time accuracy to 1 second.
The Lantech IES-2206F-II supports X-Ring, fast network recovery scheme in less than 10ms for up to 250 switches in a ring. Couple Ring ensures network recovery protection between two X-Ring groups. Dual homing is to back up the X-Ring groups when connect to upper layer or core switch.
The Lantech View is a Windows-based utility and free bundle with the IES-2206F-II for 10 node version. Optional Lantech-View Pro can map up to unlimited user with auto-layout, configuration and discovery.
With relay contact to alarm system function, the IES-2206F-II can immediately notify of power failure and/or port down events. In case of events, IES-2206F-II will immediately send an email to pre-defined addresses.
The IES-2206F-II is designed to meet the demands of Industrial environments, comes packaged in a robust IP30 housing and has been tested extensively to meet Industrial EMI and EMC standards. Rigorous mechanical testing has also been undertaken to comply with free fall, shock and vibration stability test requirements, which ensure long term reliability in critical industrial environments.
The Lantech IES-2206F-II is the best to use in automation, transportation, semi-conductor factory, heavy industrial factory and other factory assembly lines.



