Productbeschrijving
Standard
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3ab 1000Base-T
IEEE 802.3z Gigabit fiber
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.3ad Port trunk with LACP
IEEE 802.1d Spanning Tree
IEEE 802.1w Rapid Spanning Tree
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN Tag
IEEE 802.1x User Authentication (RADIUS)
IEEE 802.1ab LLDP
Switch Architecture
Back-plane (Switching Fabric): 7.4Gbps
Transfer Rate
14,880 pps for 10Base-T Ethernet port
148,800 pps for 100Base-TX/FX Fast Ethernet port
1,488,000 pps for Gigabit Fiber Ethernet port
Packet Buffer
1Mbits
Mac Address
8K MAC address table
Flash ROM
4Mbytes
DRAM
32Mbytes
Connector
10/100TX: 7 x RJ-45
10/100/1000T/ Mini-GBIC Combo: 3 x RJ-45 + 3 x
100/1000 SFP sockets
RS-232 connector: RJ-45 type
Network Cable
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5/ 5E cable
EIA/TIA-568 100-ohm (100m)
1000Base-T: 2-pair UTP/STP Cat. 5e or 6 cable
EIA/TIA-568 100-ohm (100m)
DI/DO
2 Digital Input (DI) :
Level 0: -30~2V / Level 1: 10~30V
Max. input current:8mA
2 Digital Output(DO): Open collector to 40 VDC, 200mA
Optical Cable
Multi-mode: 50/125um~62.5/125um
Single mode: 9/125um
Available distance: 2km (Multi-mode)/30km (Single-mode)
Wavelength: 1310nm (Multi-mode/Single-mode)
LED
Power/ Power 1/ Power 2 (Green), Fault (Red), Ring Master Enable (Green), Ring Enable (Green)
Copper port : Link/Activity (Green), speed(Green/Orange) [Link/1000M]
SFP Fiber: Link/Activity (Green)
Protocol
CSMA/CD
Power Supply
24 VDC (9~56VDC), 12~36VAC (Optional), Redundant power with polarity reverse protects function and removable terminal block.
Reserve polarity protection
Present
Overload current protection
Present
Power Consumption
10.2 Watts
Operating Humidity
5% to 95% (Non-condensing)
Operating Temperature
-20°C~60°C / -4°F~140°F (Standard model)
-40°C~75°C / -40°F~167°F (-E model)
Storage Temperature
-40°C~85°C / -40°F~185°F
MTBF
260818 hrs
Case Dimension
IP-30, 72mm (W) x 105mm (D) x 152mm (H)
Weight
1300 g
Installation
DIN rail and wall mount ear.
EMI & EMS
FCC Class A, CE EN61000-4-2 (ESD), CE EN61000-4-3 (RS), CE EN-61000-4-4 (EFT), CE EN61000-4-5 (Surge), CE EN61000-4-6 (CS), CE EN61000-4-8, CE EN61000-4-11, CE EN61000-4-12, CE EN61000-6-2, CE EN61000-6-4
Safety
UL, CUL, CE/EN60950-1
UL Class I Division II for Group A,B,C and D hazardous location
Stability Testing
IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration)
Warranty
5 years
Extra informatie
The Lantech IES-2307C is a 7-Port 10/100Base-TX + 3 10/100/1000T with 100/1000 SFP Combo Industrial Switch with SNMP functionality. The SNMP features are including QoS for 4 queues, 801.q VLAN, IGMP snooping and query mode as well as SNTP and SMTP.
The IES-2307C supports Pro-Ring system, which covers X-Ring, Couple Ring, Dual Homing and Dual Ring. X-Ring provides a recovery time of less than 10ms for a ring of up to 250 switches. Couple Ring ensures network recovery protection between two X-Ring groups. Dual homing is to back up the X-Ring groups when connect to upper layer or core switch. It also supports Dual Ring, which can connect two rings without setting couple ports.
The IES-2307C DIDO function can support additional open/close physical contact for designate applications besides Port / Power events, for example, DIDO function can trigger alarm if the switch was moved or stolen. In case of events, the IES-2307C will immediately send an email to pre-defined addresses as well as SNMP Traps out. It provides 2DI and 2DO while disconnection of the specific port was detected; DO will activate the signal LED to alarm. DI can integrate the sensors into the auto alarm system and transfer the alarm information to IP network with email and SNMP.
Lantech-View is free bundle for 10 node version, in which it monitors and configures multiple Lantech industrial switches. Optional Lantech-View Pro can map up to unlimited user with auto-layout, configuration and discovery.



